Wykamol Ultracure DPC Damp Proof Cream 380ml

Wykamol Ultracure is a unique silane based emulsion cream for injection into mortar bed joints to form a chemical DPC. Installed via a series of 12mm holes that are drilled in to the mortar to a depth of 90% of the wall
thickness, the cream is dispensed to fill the hole to within 1cm of the wall surface. Curing starts immediately with the final cure taking 2–6 weeks depending on wall thickness.

Ultracure injection cream is an ecologically safe damp proofing system. Ultracure is injected into mortar beds without the use of specialized high pressure equipment and is highly effective in the control of rising damp. The damp proof course injection cream is typically dispensed through a nozzle using a caulking gun or hand-pump to deliver a rapid installation without smells or mess.

Ultracure 380ml Cartridges are applied by use of a Standard C4 (400ml) Skeleton Gun and Nozzle (standard nozzle supplied with every cartridge).

Ultracure Damp Proof Cream is supported by BBA Certification Certificate No: 02/3961.

BENEFITS:

Modern rising damp treatment
Proven silicone technology
Economic consumption rates
No specialist equipment needed
Fast and clean installation
Low hazard and virtually odourless
How to Guide on Wykamol website – Ultracure-User-Guide.pdf

Drill hole depth required, dependent on wall thickness:

Wall Thickness: 115mm,230mm, 345mm, 460mm
Depth of Hole : 95mm, 210mm, 320mm, 440mm
Coverage:
Wall Thickness, 115mm, 230mm, 345mm, 460mm
Borehole Depth: 95mm, 210mm, 320mm, 440mm
Borehole Diameter: 12mm, 12mm, 12mm, 12mm
Application Rate per Per 380ml Cartridge: 4.5m, 2.25m, 1.12m, 1.0m
0.9L
1.9L
2.9L
3.9L